ROBOT PARTS
QUICK-SELECT MENU
SPI PLUGS
E.O.A.T
SPI PLUGS
MORE INFORMATION:
End Of Arm Tools
-
Tolerance: at least +/- 1*C
-
No effect on cycle time (0.5 sec)
-
MAX 4 points
-
Economic: compared to Thermistor Scale
- No need for mold sensor
- detect temp/collect data in real time -
Ability to detect both the temperature of the mold surface and the temperature of the product surface
-
Manage the temperature data during and after each cycle to prevent the production of defective products
-
Temperature-Detection Device on the robot's arm (Infrared Sensor)
-
Defective products are discarded when a standard temperature value and discard positions are programmed
-
Optional alarm notification when the temperature exceeds set value
-
Automatically saved, real-time data is available for PC download or via smartphone
NEUT:iN System
HYRobotics NEUT:iN System eliminates static from mold opening, before the robot arm takes parts from the mold, and also removes static after removal of parts.
-
Photo-Type Ionizer on the robot's arm
-
Removes electrostatic during take-out process
-
Removal is instantaneous by using a Beam Method (not air compression)
-
Remove initial electrostatics after mold open process (normally more than 20,000 Voltage)
-
Reduce labor expense and equipment costs
-
Prevent dust adhesion due to polluted air caused during Air Compression Method
-
Can be attached to any part of the robot arm (no need for air tubing)